Nottepur S145
Description
The product is a two-component, polyurethane-based, highly elastic filling material with perfect adhesion characteristics, designed specifically for use as filler on rubber mat floors for sports facilities.
Usage Areas
- To obtain a smooth surface by filling the holes in rubber.
- Suitable for parquet, fiberboard, plywood, or polystyrene foam (EPS&XPS) applications.
Characteristics
- High adhesive power.
- High elasticity.
- Adhesion on different surfaces.
- Solvent-free.
Application Method
- The concrete surface must be clean. The compression resistance should be no less than 25 N/mm², with a tensile resistance (pull off) of at least 1,5 N/mm².
- Consequently, the concrete surface for coating must not be less than C25 or preferably C30 – C35 standard.
- The concrete to be coated must be strong.
- The unstable layer of the surface must always be removed.
- First mix components A and B separately on its own. Then add component B into component A and mix for at least 3 minutes until a homogenous color is obtained.
- Use a helix mixer of at least 300-400 rpm for mixing.
- Apply the mixture to the prepared surface using a V type notched trowel with dimensions of 4x4x4 mm.
- The mixture should be consumed within a maximum of 1 hour.
Consumption
0.400-0.800 kg/m² (Varies according to the condition of the rubber mat surface and the type of coating).
Packaging and Storage
- Package: 22 kg Bucket Set: 20 kg (A) + 2 kg (B)
- Storage: The product may be stored for 12 months in sealed original packaging at a cool and dry place.
Safety Precautions
- Contact of the product with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water.
- If swallowed, drink a few glasses of water immediately and seek medical advice.
- In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained.
- Gloves and protective goggles should be used during use.
Property Value Chemical Structure Polyurethane Density Component A+B: 1.75 kg/L (at 23°C) Solids Content ~96100% (by volume), ~96100% (by weight) Mixture Ratio (A+B) 90/10 (by weight) Note: The above values are given at +20°C and for 50% relative humidity. High temperatures shorten the time, low temperatures prolong the time.
Technical Data
| Property | Value |
|---|---|
| Chemical Structure | Polyurethane |
| Density | Component A+B: 1.75 kg/L (at 23°C) |
| Solids Content | ~96100% (by volume), ~96100% (by weight) |
| Mixture Ratio (A+B) | 90/10 (by weight) |
Note: The above values are given at +20°C and for 50% relative humidity. High temperatures shorten the time, low temperatures prolong the time.
Application Areas
