Nottepur P600

Description

NOTTEPUR P600 is a one-component, elastomeric, moisture-curing, polyurethane sealant.

Used for joint filling in horizontal and vertical surfaces in indoor and outdoor spaces.
Suitable for filling joints in structures such as steel, aluminum, metal, copper, stone, plastic, wood, concrete, and parapets.
Used as an adhesive for joining light elements and industrial floors.
Applied between precast wall panels and in the joining details of prefabricated elements.
Used for filling expansion joints.

Resistant to water, industrial detergent, hydrocarbon resin, and other chemicals.
Antibacterial.
High adhesion feature.
Provides permanent waterproofing and is long-lasting.
Can be painted with water-based acrylic paint.
Does not require the use of primer.
It is not affected by weather conditions, expansion movements.

Ensure surfaces are clean and free from dust, oil, paint, curing, and bitumen.
Sand raised and swollen areas on wooden surfaces.
Thoroughly clean rust, dirt, and old oil on metal surfaces.
Clean joints on cement-based surfaces with a wire brush.
Use a polyethylene backing rod to support the joint paste and adjust its depth before application.

Apply NOTTEPUR P600 using a cartridge/sausage gun.
For cartridges, drill the plug at the end and cut and attach the plastic mouthpiece according to the joint size.
For sausages, place the sausage in the gun tube, cut the tip, close the gun, and make the application.
Press the material towards the joint edges with a spatula immediately after application for better adhesion.
Protect the product against water for 2-3 hours after application.
When applying to concrete surfaces, ensure the concrete is at least 28 days old and the surface is dry.
Prevent contact of the product with the skin during application, and wash with plenty of water in case of contact.

Packaged in 600 ml Sausage.
Shelf life when stored in its original packaging at +10°C to +30°C in dry, protected, and ventilated environments, protected from sun, rain, and frost, is 12 months from the date of manufacture.

Gloves, protective clothing, masks/goggles should be used during mixing and application, and contact of the product with eyes, mouth, and skin should be prevented.
In case of contact with skin, it should be washed with plenty of water, and in case of contact with eyes and swallowing, a doctor should be consulted.

Property	Value
Shore A hardness	~35
Specific gravity	~1.15 g/ml
Service temperature	-35°C / +80°C
Application temperature	+5°C / +35°C
Curing speed	60-100 minutes (20°C, 50% humidity)
Curing thickness	2.5 mm (24 hours, 20°C)
Elasticity module	0.20 MPa
Tensile strength	~0.40 N/mm² (100%, +20°C)
Flexibility	150%
Color	Grey, red, black, white, green, beige