Nottepur D800

Description

Two-component, polyurethane-based, pourable isolation material used for wide dilatation joints (10-15 cm). Creates an extremely elastic film curing with the humidity in the air. Can be applied in a wide temperature range. Suitable only for horizontal joints.

Usage Areas

Used as isolation and dilatation material for wide dilatation joints (10-15 cm).

Characteristics

Easily applied because of self-leveling characteristic.
Highly elastic structure.
Adhesion on all surfaces (especially on primed surfaces).
Maintains elasticity even under -40 °C.
Fills dilatation joints perfectly because of its liquid (pourable) characteristic.

Application Method

Remove all soil, grease, mortar particles, cement residues, loose particles from inside of dilatation joints to be filled.
Dilatation joints must be clean and dry.
Prime the surface if necessary before application of NOTTEPURD800.
Caution: Particularly recommended for application on primed surfaces.

First mix thoroughly components A and B separately on their own.
Then add component A into component B and mix for at least 3 minutes until the color of the mixture becomes gray.
Use mechanical mixers at at least 300-400 rpm for mixing.
To obtain best result, dilatation joint filling, the ratio of the width to depth must be 2/1, with the depth required min. 10 mm.
Apply by pouring the polyurethane based liquid filler into the joint while the primer is still tacky.
Application time of mixed system is 0.5 to 1 hour.
Recommended application temperature changes between +5°C and +40°C.
To reduce the consumption and to control filling depth, polyethylene fillings are placed in dilatation joints before application.

Consumption

To obtain best results in dilatation joint filling, the ratio of width to depth must be 2/1, which means the depth is required to be a minimum of 10 mm.
Consumption amounts change according to width and depth of dilatation joints.

Packaging and Storage

Packaging: 5 kg Tin Set: 4 kg (A) + 1 kg (B)
Storage Conditions: The product may be stored for 12 months in sealed original packaging at a cool and dry place.

Safety Precautions

Contact of the product with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water. If swallowed, drink a few glasses of water immediately and seek medical advice.
In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained. Gloves and protective goggles should be used during use.

Technical Data

Property	Value
Density	20 Shore A at 20°C
Using Temperature	between -40 °C and 90 °C
Application Temperature	between -5 °C and 40 °C
Elongation at Break	>9500%
Tensile Strength	at 6100 Elongation 4 N/mm²
Elasticity	>960%
UV Accelerated Aging Test	Passed after 1000 hours