Nottepur 1KUV

Description

NOTTEPUR 1KUV is a polyurethane-based, single-component, cold-applied, UV-resistant, liquid elastic insulation material.

Usage Areas

On terraces, roofs, and balconies.
On wet floors such as bathrooms, kitchens.
On metal surfaces and mosaic surfaces.
In the insulation of water tanks and ducts.
In concrete structures such as bridges, viaducts, tunnels.

Characteristics

It is UV resistant.
It is resistant to constant water contact.
It is single-component and easy to apply.
It has a high crack covering capacity.
Jointless coating is applied.
It does not prevent the passage of steam.
It is not poisonous or harmful.
It is resistant to chlorine, alkali, and chemicals.
It has high resistance to freezing.

Application Method

Clean the application surface from anti-stick materials such as dust, oil, tar, pitch, paint, silicone, curing material, detergent, and mold oils.
Repair weak parts of the concrete.
Ensure the surface is smooth and solid.
Repair static cracks in the building with NOTTEFIX LATEX plaster.
Fill dynamic (moving) cracks with NOTTEPUR MASTIC polyurethane mastics and chamfer them appropriately in vertical corners.
Plug holes through which water comes with NOTTEFIX PLUG.

Absorbent surfaces such as concrete should be primed with NOTTEPUR P140.
Non-absorbent surfaces such as damp or ceramic should be primed with NOTTEPUR P150.

The material must first be mixed with a suitable mixer for at least 3 minutes.
The material can be thinned with a maximum of 5% by weight of Cellulosic Thinner if desired.

Mix the material with a suitable mixer for at least 3 minutes.
For spraying application, add a maximum of 5% Cellulosic Thinner to the product and mix.
Apply the first coat and wait for a minimum of 6 and a maximum of 24 hours before applying the second coat.

Do not apply the material when the ground temperature is below +5°C or above +35°C.
Packages are for single use and should be completely consumed within the specified periods.
Protect the material from rain, frost, and direct sunlight within the first 24 hours after application at +20°C.
Ensure the application surface is not wet. NOTTEPUR 1KUV is resistant to up to 4% moisture on the surface. Use moisture-tolerant polyurethane or epoxy primers on surfaces with higher humidity before application.
Roughen very smooth surfaces before application.
If the application area will have light pedestrian traffic, apply NOTTEPUR 1KCA after the product is completely dried.

Consumption

1.50 – 2.00 kg/m² (For 2 coats of application)

Packaging and Storage

25 kg Tin.
In its original packaging, in dry, protected, and ventilated environments at +10°C / +30°C, when stored protected from sun, rain, and frost, its shelf life is 12 months from the date of production.

Safety Precautions

During application and mixing, contact of the material with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water.
In case of contact with eyes, they should be washed immediately with plenty of water, and medical assistance should be obtained.
Gloves, protective clothing, mask, goggles should be used during use.

Technical Data

Parameter	Value
Material structure	Polyurethane liquid
Color	White, Grey
Density	1.35 gr/cm³ (20°C and 50% R.H.)
Shore A Hardness	60
Viscosity	4000–6000 cP
Elongation	> 600%
Application temperature	+5°C / +35°C
Service temperature	-30°C / +80°C
First drying	4–6 hours
Final drying	5 days