Nottepur 1KUC

Description

NOTTEPUR 1KUC is a polyurethane-based, single-component, cold-applied, gray-colored, liquid elastic insulation coating.

Usage Areas

On terraces, roofs, and balconies
On wet floors such as bathrooms, kitchens
On metal surfaces
On mosaic surfaces
In the insulation of water tanks and ducts
In concrete structures such as bridges, viaducts, tunnels

Characteristics

It should be used under the coating.
It is resistant to constant water contact.
It is single-component and easy to apply.
It has a high crack-covering capacity.
Jointless coating is applied.
It does not prevent the passage of steam.
It is not poisonous or harmful.
It is resistant to chlorine, alkali, and chemicals.
It has high resistance to freezing.

Application Method

The application surface should be cleaned from anti-stick materials like dust, oil, tar, paint, silicone, and mold oils.
Weak parts of the concrete should be repaired, and the surface should be smooth and solid.
Static cracks in the building should be repaired with EBUFIX LATEX plaster.
Dynamic cracks should be filled with EBUPUR MASTIC polyurethane mastics and chamfered appropriately in vertical corners.
Holes through which water comes should be plugged with BUFIX PLUG.

Absorbent surfaces such as concrete should be primed with EBUPUR P140, or non-absorbent surfaces such as ceramic should be primed with EBUPUR P150.

The material must first be mixed with a suitable mixer for at least 3 minutes.
The material can be thinned with a maximum of 5% by weight of Cellulosic Thinner when desired.

Before use, open the package and mix the product with a low-speed mixer for at least 3 minutes.
Pour the product on the primed surface and apply a minimum of two coats using a roller or brush until the entire surface is covered.
If applying with a spray, add a maximum of 5% Cellulosic Thinner to the product and mix well.
After applying the first coat, apply the second coat within a minimum of 6 and a maximum of 24 hours.

Do not apply the material when the ground temperature is below +5°C or above +35°C.
Packages should be entirely used once opened.
Protect the material from rain, frost, and direct sunlight within the first 24 hours after application at a temperature of +20°C.
Ensure the application surface is not wet. NOTTEPUR 1KUC is resistant to up to 4% moisture on the surface. If the surface has higher humidity, moisture-tolerant polyurethane or epoxy primers can be used before application.

Consumption

1.50 – 2.00 kg/m² (For 2 coats of application)

Packaging and Storage

25 kg Tin
In its original packaging, in dry, protected, and ventilated environments at +10°C/+30°C, when stored protected from sun, rain, and frost, its shelf life is 12 months from the date of production.

Safety Precautions

During application and mixing, contact of the material with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water.
In case of contact with eyes, they should be washed immediately with plenty of water, and medical assistance should be obtained.
Gloves, protective clothing/mask/goggles should be used during use.

Technical Data

Property	Value
Material structure	Polyurethane liquid
Color	Gray
Density	1.35 gr/cm³ (20°C and 50% R.H.)
Shore A Hardness	60
Viscosity	4000–6000 cP
Elongation	>400%
Application temperature	+5°C / +35°C
Service temperature	-30°C / +80°C
First drying	4–6 hours
Final drying	5 days