Nottepur 1KTR
Description
NOTTEPUR 1KTR is a polyurethane-based, one-component, self-liquid, ready-to-use, UV-resistant, high-tech transparent coating and waterproofing material.
Usage Areas
- On balconies and terrace roofs with light pedestrian traffic.
- On balconies and terraces covered with materials such as glazed tiles, ceramics, natural stone, marble, tiles.
- On reinforced concrete surfaces, plasters, and screed.
- On glass, on glass brick, on metals such as iron, steel, aluminum.
Characteristics
- It is transparent and does not damage the existing coating, allowing waterproofing without changing the appearance of the bottom coating. It is decorative.
- It does not contain materials like silicone oil and plasticizer, preventing color changes due to oil vomiting in building materials such as natural stone and marble.
- It is resistant to wear from light pedestrian traffic in areas like terraces and balconies.
- It is UV resistant, preventing cracking, yellowing, and leakage.
Application Method
- The application surface should be cleaned from anti-stick materials like dust, oil, tar, pitch, paint, silicone, curing material, detergent, and mold oils.
- Surfaces may need to be roughened with mechanical methods in certain areas.
- Prior to application, the surface must be primed with NOTTEPUR P300.
- The primer should be applied to dry surfaces with a clean cloth, avoiding excessive build-up, and using the minimum amount necessary.
- NOTTEPUR 1KTR is a ready-to-use product applied with a brush or roller.
- When applying on jointed surfaces, coat the joints first using a brush.
- Apply two coats of the product to all surfaces using a roller.
- Allow the first layer to completely dry before applying the second layer.
- The application surface should be completely dry.
- In cases where the ground temperature is below +5°C and above +35°C, the material should not be applied.
- Packages are designed for single use.
- When it is opened, it must be consumed completely within the specified periods.
- The material should be protected from rain, frost, and direct sunlight within the first 24 hours after application (+20°C).
- Do not apply on damp or wet surfaces, in areas with negative water – water vapor pressure, and in areas that are in constant contact with water such as swimming pools and water tanks.
Consumption
- On non-absorbent surfaces: 0.400 kg/m²
- On absorbent surfaces: 0.800 kg/m²
Packaging and Storage
- 5 and 25 kg Tin
- In its original packaging, in dry, protected, and ventilated environments at +10°C / +30°C, when stored protected from sun, rain, and frost, its shelf life is 12 months from the date of production.
Safety Precautions
- During application and mixing, contact of the material with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water.
- In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained.
- Gloves, protective clothing, mask, and goggles should be used during use.
Technical Data
| Property | Value |
|---|---|
| Appearance | Transparent liquid coating |
| Density | 1.10 ± 0.05 kg/lt |
| Application Temperature | +5°C to +35°C |
| Shore A Hardness | 90 ± 5 |
| Elongation at Break | > 300% (7 days) |
| Film Creation Time | 60 ± 30 minutes |
| Curing Speed | 1 mm / 24 hours |
| Service Temperature | -30°C / +80°C |
Note: The above values are given at +20°C and for 50% relative humidity. High temperatures shorten the time, low temperatures prolong the time.
Application Areas
