Notteproof BP1K
Description
NOTTEPROOF BPIK is a one-component, bitumen polyurethane-based liquid waterproofing material. It adheres strongly to the applied surface and forms an elastic film. It is suitable for vertical and horizontal application.
Usage Areas
- Floors
- Under-coating areas
- Foundations and curtains
- Gypsum and cement panels
- Under cladding on terraces, roofs, and balconies
Characteristics
- Apply using a brush, roller, or suitable spraying machines.
- Forms a seamless and leak-proof insulation layer.
- Elastomeric and hydrophobic structure.
- Effective water vapor permeability prevents moisture accumulation.
- Easy and quick repairs in case of damage.
- Provides effective resistance to chemicals.
- Ideal for vertical applications with no leakage or sagging.
Application Method
- Remove wet, grease, paraffin wastes, loose particles, and other factors that weaken adherence before application.
- Wash the surface with high-pressure water if possible and repair surface defects.
- Use NOTTEPOX P140 on absorbent surfaces like concrete and cement (maximum humidity of 4%).
- Use NOTTEPOX P355 on damp or non-absorbent surfaces.
- Open the package and mix the product with a low-speed mixer for at least 3 minutes before use.
- Pour the product on the primed surface and apply a minimum of two coats using a roller or brush until the entire surface is covered.
- Apply the second coat within a minimum of 6 and a maximum of 24 hours after the first coat.
- The packages are intended for single use and should be consumed completely once opened within the specified periods.
- After application, protect the surface from water, rain, dew, frost, and snow until it is completely dry.
- Once the product is fully dried, it should be covered or protected.
Consumption
1.50 – 2.00 kg/m² (for 2 layers of application)
Packaging and Storage
- 23 kg Tin
- Shelf life when stored in its original packaging at +10°C / +30°C in dry, protected, and ventilated environments, protected from sun, rain, and frost, is 12 months from the date of manufacture.
Safety Precautions
- During application and mixing, contact of the material with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water.
- In case of contact with eyes, they should be washed immediately with plenty of water, and medical assistance should be obtained.
- Gloves, protective clothing/mask/goggles should be used during use.
Technical Data
| Material Structure | Bitumen-Polyurethane |
|---|---|
| Mixture Density | 1.10 gr/cm³ |
| Color | Black |
| Period of Use | 60 minutes (25°C) |
| Floor Temperature to be Applied | +5°C / +30°C |
| Service Temperature | -20°C / +80°C |
| Hardness | 35 (Shore A) |
| Solid Matter Ratio | 85% (±5) |
| Breaking Expansion Percentage | ≥700% |
| Breaking Strength | ≥3 N/mm² |
| Adhesion to Concrete | ≥2 N/mm² (Lined) |
Note: The above values are given at +20°C and for 50% relative humidity. High temperatures shorten the time, and low temperatures prolong the time.
Application Areas
