Notteproof B1KUV

Description

NOTTEPROOF BIKUV is a rubber-bitumen-based, one-component solvent-free, UV-resistant, 800% elastic waterproofing material.

Suitable for concrete, plaster, screed, plastered brick, bituminous membrane, pitch, asphalt, metal, wood, zinc, sheet, and various plastics.
Used for waterproofing aerated concrete floors that are plastered or primed.
Ideal for waterproofing curtain walls, retaining walls, underground car park floors, terraces, garden terraces, balconies, roof streams (concrete, GRP, sheet, zinc), and wet areas.
Suitable for repairing old bituminous membrane insulations.
Can be used both underground and above ground.
Suitable for horizontal and vertical surfaces.

Elasticity: Can stretch up to 800%.
Forms a seamless and waterproof coating when dry.
Wide temperature range: -20°C to +200°C.
UV-resistant, suitable for areas exposed to sunlight.
Suitable for terraces, flat roofs, and roof streams.
Effective for underground use and resistant to microorganisms and aggressive groundwater.
Strong adhesion to dry and slightly damp surfaces, both absorbent and non-absorbent.
Does not separate or swell over time.
Can be used alone for curtain wall insulation.
Suitable for joint sealing and repairs of bituminous membranes and shingles.

Before application, the surface should be free from adhesive substances such as dust, oil, paint, curing.
Mortar residues, loose floors have to be cleaned, cracks and broken areas have to be repaired and the surface level has to be leveled.
The application surface should not be wet.

For priming, 1 kg of NOTTEPROOF BIKUV can be applied to the surface as a primer by mixing with 2 L of water and a 400–600 rpm mixer.
After the primer is dried, it is started to be applied.

Apply 2–3 layers by brushing or spraying using suitable equipment.
Apply the second coat after the first coat has dried.
Reinforce joints and areas prone to cracking with polyester mesh (56 g/m²) or reinforcement felt (45 g/m²).
Protect the surface from rain and frost for 48 hours after application.

For terrace application of NOTTEPROOF BIKUV, use reverse roof detail with heat insulation layer applied over the water insulation layer.
Ensure solid slab concrete with a smooth surface and a minimum 1% slope to avoid puddling.
Strip multi-porous, distorted, or perforated surfaces with NOTTEPROOF BIKUV to prevent air bubble formation and smoothen the surface.
Protect the exterior surface from strong wind and frost for the initial 48 hours.
Avoid water contact until completely dry (2 days).

5 and 20 kg Plastic buckets

Store in ventilated, dry, and protected environments at +5°C/+30°C, protected from sun, rain, and frost.
Shelf life: 1 year from the date of manufacture.

Use gloves, protective clothing, masks/goggles during mixing and application.
Prevent contact with skin and eyes; if contact occurs, rinse thoroughly with plenty of water.
In case of contact with eyes and swallowing, seek medical assistance.