Notteproof 2KSE

Description

NOTTEPROOF 2KSE is a polymer reinforced, non-shrink, high-performance, semi-elastic waterproofing material.

Usage Areas

In vertical and horizontal applications in indoor and outdoor spaces.
It is used to ensure water impermeability under screed and ceramic in balconies and wet areas.

Characteristics

NOTTEPROOF 2KSE provides long-lasting waterproofing for the applied structure.
It exhibits strong adhesion to mineral-based surfaces such as concrete, screed, and mosaic.
Suitable for both interior and exterior surfaces.
Forms a flexible and elastic coating.
Resistant to shrinkage and cracking.
Ideal for structures with existing cracks or prone to cracking.
Does not impede the breathability of the structure.
Applicable to both horizontal and vertical surfaces.
Once fully dried, it remains unaffected by freezing and thawing.
Can be applied on damp surfaces.

Application Method

Prior to applying NOTTEPROOF 2KSE, ensure the surface is clean and free from dust, oil, paint, curing agents, and any other substances that may hinder penetration.
It is recommended to roughen the surface to enhance adhesion.
For optimal application, the surfaces should be damp. If the surface is dry, it should be moistened and saturated with water before applying the product.

Combine component B with component A (powder) and mix continuously for 4-5 minutes.
Allow the mixed material to rest for 5 minutes, then mix again for at least 3 minutes until it is ready for application.
The material should be used within 1 hour after mixing and preparing it (at 20°C).

Apply NOTTEPROOF 2KSE in 1-3 brush layers, each around 1-1.5 mm thick.
Use a 2 mm thick mortar.
Use elastic mesh or armure felt between layers for added strength and flexibility.
Reinforce corner joints with elastic bands to prevent cracking.
NOTTEPROOF 2KSE achieves full strength after 28 days.
Apply NOTTEFIX FILM as a primer before waterproofing.

Protect the surface from rain and frost for at least 24 hours after application.
Avoid applying the product if the ground temperature is expected to drop below 5°C within 24 hours.
In high-temperature environments, apply the material quickly and continuously during morning and evening hours, and store in the shade.
In low-temperature environments, start the application at noon, ensuring the temperature is below 5°C and the surface is not frozen. Keep the material in a warm environment and protect the surface from frost after application.

Consumption

2.5 – 3 kg/m² (average 2 mm thickness)
1st layer: 1.60 kg/m² – 2nd layer: 1.40 kg/m²

Packaging and Storage

25 kg Set (20 kg A powder + 5 kg B liquid).
In its original packaging, when stored in ventilated, dry, and protected environments at +5°C/+25°C, protected from sun, rain and frost, its shelf life is 1 year from the date of manufacture.

Safety Precautions

Gloves, protective clothing, masks/goggles should be used during mixing and application, and contact of the product with eyes, mouth, and skin should be prevented. In case of contact with skin, it should be washed with plenty of water, and in case of contact with eyes and swallowing, a doctor should be consulted.

Technical Data

Property	Value
Floor temperature to be applied	+5°C / +35°C
Service temperature	-20°C / +80°C
Adhesion to concrete	> 1.5 N/mm²
Processability time	1 hour (20°C, 50% humidity)
Density	1.65 ±0.05 kg/l
Compressed water strength	5 bars positive
Setting time (20°C)	6 hours first setting, 24-hour final setting
Capillary water absorption	≤ 0.1 kg/m², hour 0.5