Notteproof 2KFE UV

Description

EBUCHEM 2CUV is a fully elastic, UV resistant, white colored, 2 component waterproofing material that protects the structure against cracks, has a high degree of adhesion, resistant to tensile & shrinkage.

Usage Areas

In all kinds of reinforced concrete structures with the possibility of cracking.
In waterproofing from the positive side,
In reinforced concrete roofs and terraces,
Water structures, water tanks, pools,
On balconies, in wet areas,
It is used on horizontal and vertical surfaces.

Characteristics

EBUCHEM 2CUV provides waterproofing as a permanent part of the applied structure.
It adheres strongly to concrete, screed, mosaic and similar mineral-based surfaces.
It can be applied to interior and exterior facades.
It makes an elastic coating.
It does not shrink and does not crack.
It is used in structures that may crack or structures that still have cracks.
It increases the durability of the structure it is applied against external factors such as sea water, salt, calcium and oil.
It does not prevent the applied structure from breathing.
It is used on horizontal and vertical surfaces.
After the product is completely dried, it is not affected by freezing and thawing.
It can be applied to damp surfaces.

Application Method

Before application of EBUCHEM 2CUV, the surface should be free from dust, oil, paint, curing and other substances that are unrelated to the structure and prevent penetration.
The surface should be roughened to ensure adhesion.
Surfaces to be applied should be damp, dry surfaces should be moistened and saturated with water before application.

EBUCHEM 2CUV has two components.
First, component B (liquid) is placed in a clean container. Then, all of component A (powder) is slowly added to component B and stirred continuously for 4-5 minutes.
The mixed material is rested for 5 minutes and again mixed for at least 3 minutes and made ready for application.
The material should be used within 1 hour after it is mixed and ready for use. (at 20°C)

EBUCHEM 2CUV is applied to the concrete surface with 1-3 layers of brush to make 1-1.5 mm thickness in each layer.
The thickness of the mortar applied should be around 2 mm.
For strength and flexibility, use elastic mesh or armure felt between layers.
At corner joints, chamfer bands should be used to increase strength and prevent cracking.
EBUCHEM 2CUV becomes resistant to rain 24 hours after application, reaches its final strength after 28 days.
The applied product should be protected against external factors for 24-48 hours.

After application, the surface should be protected from rain and frost for at least 24 hours.
In cases where the ground and air temperature are expected to fall below +5°C within 24 hours after the application, the application should not be performed.
In high temperature environments, the application should be done quickly and uninterruptedly in the morning and evening hours and the material should be kept in the shade.
In low temperature environments, the application should be started at noon, provided that the temperature is below 5°C and the surface is not frozen, the material should be kept in a hot environment and the surface should be protected from frost after application.

Consumption

3-4 kg/m² (average 2-2.5 mm thickness) 1st layer: 1.60 kg/m²
2nd layer: 1.40 kg/m²
3rd layer: 1.00 kg/m²

Packaging and Storage

30 kg Set (20 kg A powder + 10 kg B liquid)

In its original packaging, when stored in ventilated, dry and protected environments at +5°C/+25°C, protected from sun, rain and frost, its shelf life is 1 year from the date of manufacture.

Safety Precautions

Gloves, protective clothing, masks/goggles should be used during mixing and application, and contact of the product with eyes, mouth and skin should be prevented. In case of contact with skin, it should be washed with plenty of water, and in case of contact with eyes and swallowing, a doctor should be consulted.

Technical Data

Property	Value
Floor temperature to be applied	+5°C / +35°C
Service temperature	-20°C / +80°C
Adhesion to concrete	2 N/mm²
Processability time	1 hour (20°C, 50% humidity)
Density	1.65 ± 0.05 kg/l
Compressed water strength	7 bars positive
Capillary water absorption	≤ 0.1 kg/m² hours 0.5
Color	White