Notteprime P300
Description
NOTTEPRIME P300 is a polymer modified, resin-based primer that provides good adhesion of gypsum or cement-based plasters to exposed concrete, walls and ceilings.
Usage Areas
- In ceilings and vertical surfaces in interior spaces,
- In order to ensure better adhesion of gypsum, lime and cement based plasters to concrete surfaces.
Characteristics
- It is easy to apply.
- It increases the working time and workability of gypsum and cement based plasters.
- It prevents rapid water loss of gypsum and cement based plasters.
- It is odorless and does not contain solvent.
Application Method
The surface should be free from complete dust, oil, curing agent, paint and other free particles and care should be taken to ensure that the surface is dry.
- 3-5 liters of water are added to the inside of the 12 kg NOTTEPRIME P300 bucket.
- It is mixed with a mixer at 400-600 rpm for 3-5 minutes.
- The material should be mixed from time to time during application.
- The mixed material is applied to the surface with a textured roll.
- After 24 hours, gypsum or cement-based plasters can be applied.
- NOTTEPRIME P300 is not suitable for high humidity environments such as pools and baths, coarse plasters & external surfaces.
- Primed surface should be prevented.
Consumption
According to the absorbency of the surface: NOTTEPRIME P300 consumption: 200-350 gr/m²
Packaging and Storage
- 12 kg Plastic bucket.
- In its original packaging, when stored in ventilated, dry and protected environments at +5°C / +25°C, protected from sun, rain and frost, its shelf life is 1 year from the date of manufacture.
Safety Precautions
Gloves, protective clothing, masks/goggles should be used during mixing and application, and contact of the product with eyes, mouth and skin should be prevented. In case of contact with skin, it should be washed with plenty of water, and in case of contact with eyes and swallowing, a doctor should be consulted.
Technical Data
| Property | Value |
|---|---|
| Density (25°C, g/mL) | 1.30 ± 0.02 |
| Material Structure | Modified polymer-resin |
| Solvent | Free |
| Application temperature | +5°C / +30°C |
| Service temperature | -20°C / +80°C |
| Drying time | 1-2 hours |
| Application thickness | 0.15 – 0.30 mm |
The above values are given at 20°C and for 50% relative humidity. High temperatures shorten the time, low temperatures prolong the time.
Application Areas
