Nottefix

Notteprime P245

Description

NOTTEPRIME P245 acrylic copolymer is a multi-purpose primer based on emulsion, transparent, which can be used on the inside and outside of structures and before acrylic based waterproofing coatings.

Usage Areas

NOTTEPRIME P245 acrylic copolymer is a multi-purpose primer based on emulsion, transparent, which can be used on the inside and outside of structures and before acrylic based waterproofing coatings.

Characteristics

  • It penetrates the surface very well.
  • By preparing a solid floor, it binds the top coat paint to the surface, reduces the paint consumption.
  • It is a primer with very high adhesion performance.

Application Method

  • Before application, swollen, loose and spilled surfaces should be scraped, oil and dirt should be wiped with water and cleaned.
  • Uneven surfaces should be corrected in advance with repair mortars.

Before using NOTTEPRIME P245, it is mixed thoroughly until it is homogeneous, brushed or rolled, and applied as a single layer. Paint or insulation product application should be started after waiting minimum 4 hours drying time of primer.

  • The applied surface should be protected from all external factors such as rain, water, mechanical impacts etc. for at least 24 hours during and after the application.
  • It should not be applied in very windy and direct sunlight.
  • It should be applied as a single layer by being fed well on the surface and a minimum of 4 hours should be allowed to dry before the other application.

Consumption

100 – 200 gr/m²

Packaging and Storage

  • 10 kg plastic bucket.
  • 12 months in its original, unopened packaging in a cool and dry environment.

Safety Precautions

During application and mixing, contact of the material with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water. If swallowed, drink a few glasses of water immediately and seek medical advice. In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained. Gloves, protective clothing / mask / goggles should be used during use.

Technical Data

Property Value
Density (25°C) 1.00 ± 0.10
pH (25°C) 8.0 – 9.0
Touch drying time (20°C) 2 hours
Full Drying time (20°C) 72 hours
Application temperature 5°C / 30°C

The above values are given at 20°C and for 50% relative humidity. High temperatures shorten the time, low temperatures prolong the time.

Application Areas

Send Message
Hello,
Can we help you?