Nottepox SL140

Description

NOTTEPOX SL140 is a two component, epoxy-based, self-levelling midlevel flooring material.

Usage Areas

On concrete and cement based surfaces,
In warehouses,
Industrial floors,
In shopping malls,
In the hangars,
In exhibition and fair areas,
In hospitals & laboratories as midlevel application.

Characteristics

It can be applied smoothly to sandy or sandless surfaces due to its spontaneous levelling feature.
Easy to apply.
It can be produced in the desired RAL color.

Application Method

Oil, wax, grease, water repellents that will weaken the adhesion forces on the surface should be cleaned and removed with free parts that can be easily lifted and dust floor milling machine.
New concrete must be at least 28 days old.
Cracks in the concrete and the parts that need to be repaired must be repaired with suitable products such as NOTTEPOX R555.

Component A and component B, packaged separately with predetermined ratios, are combined by fully discharging component B into component A and mixing them together using a mixer set at 300 rpm.
The mixture should be prepared in the required quantity, considering its limited lifespan, as it is a two-component product.
To ensure a uniform mixture, the product temperature must not drop below 15°C.
Component A should be mixed independently with a mechanical mixer, and component B (hardener) should be added while maintaining the specified mixture ratio.
Both components A and B should be mixed with a mechanical mixer for at least 3 minutes until they achieve homogeneity.
The mixture should be consumed within a timeframe of 20 min.

The mixture is applied on the surface and spread homogeneously with the adjusted jig or comb trowel.
Use high odor roll to remove bubbles away from the material.
It is recommended to wear spiked shoes to prevent the application surface from deteriorating during application.
The maximum allowable relative humidity is 80%, ground humidity should not exceed 2%, and the application temperature (both environment and surface) should range between +10°C and +30°C.
The product is not recommended for outdoor use.
For chemical strength values, please consult our technical unit.

Consumption

0.600 – 0.800 kg/m²
Before epoxy self levelling last coat application

Packaging and Storage

24 kg Tin (Set: Component A: 21 kg + Component B: 3 kg).
Shelf life when stored in its original packaging at +10°C / +30°C in dry, protected and ventilated environments, protected from sun, rain and frost, is 6 months from the date of manufacture.

Safety Precautions

During application and mixing, contact of the material with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water. In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained. Gloves, protective clothing/mask /goggles should be used during use.

Technical Data

Technical Data	Specification
Density (gr/cm³)	1.80
Viscosity	1500 mPa.s (± 23°C)
Abrasion Resistance (mg/7 days old)	40-45
Compressive Strength (N/mm²)	> 40
Bending Strength (N/mm²)	> 34
Cohesion to concrete (N/mm²)	> 4
Adhesion at 25°C (minutes)	20
Initial Curing	24 hours
Final Curing	7 days