Nottepox SL135

Description

NOTTEPOX SL135 is a two component, epoxy-based, self-levelling floor system designed for industrial floors, with smooth surface finish, easy to clean.

Usage Areas

On concrete and cement based surfaces,
In warehouses, in industrial areas,
In shopping malls, in the hangars,
In exhibition and fair areas,
In hospitals & laboratories.

Characteristics

It has high mechanical strength.
It can be applied smoothly to sandy or sandless surfaces due to its spontaneous spreading feature.
It has high abrasion resistance.
Easy to apply.
Easy to clean and maintain.
It forms an impermeable layer against liquids.
It can be produced in the desired RAL color.

Application Method

Remove oil, wax, grease, and water repellents from the surface using a dust floor milling machine or other suitable methods that can easily lift free particles.
Ensure that new concrete is at least 28 days old.
Repair cracks and damaged parts with suitable products like NOTTEPOX R555.
Prime the surface with epoxy-based primers before application.
Roughen the surface using appropriate mechanical methods prior to applying the primer layer.

Component A and component B are provided in separate packages with predetermined mixture ratios.
Completely empty component B into component A and mix them together.
Use a mixer at a speed of 300 rpm for the mixing process.
Prepare the two-component product in the required amount, considering the product life and specified mixture ratio.
Ensure that the mixture temperature is not below 15°C to achieve a homogeneous mixture.
Mix component A with a mechanical mixer and then add the hardener (component B) according to the specified ratio.
Mix components A and B with a mechanical mixer for at least 3 minutes until they are homogeneous.
Consume the mixture within 20 minutes.

The mixture is applied on the surface and spread homogeneously with the adjusted jig or comb trowel.
Use high odor roll to remove bubbles away from the material.
It is recommended to wear spiked shoes to prevent the application surface from deteriorating during application.

Protect the surface from external factors for a minimum of 24 hours after application.
Allow controlled and light pedestrian traffic after 4 days and vehicle traffic after 7 days.
Ensure the relative humidity of the air is below 80% and ground humidity is below 2% during application.
Maintain an application temperature between +10°C and +30°C.
Note that the product is not suitable for open space applications. For chemical strength values, consult our technical unit.

Consumption

1.50 kg/m²
(For 1mm thickness)

Packaging and Storage

20 kg Tin (Set: Component A: 16 kg + Component B: 4 kg).
Shelf life when stored in its original packaging at +10°C / +30°C in dry, protected and ventilated environments, protected from sun, rain and frost, is 12 months from the date of manufacture.

Safety Precautions

During application and mixing, contact of the material with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water. In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained. Gloves, protective clothing/mask /goggles should be used during use.

Technical Data

Technical Data	Specification
Density (gr/cm³)	1.50
Viscosity	1200 mPa.s (± 23°C)
Abrasion Resistance (mg/7 days old)	40-45
Compressive Strength (N/mm²)	> 40
Bending Strength (N/mm²)	> 34
Cohesion to concrete (N/mm²)	> 4
Adhesion at 25°C (minutes)	20
Initial Curing	24 hours
Final Curing	7 days