Nottepox R555

Description

NOTTEPOX R555 is a two-component, solvent-free, non-shrinkage, thixotropic epoxy repair, anchorage and bonding mortar.

Thixotropic/trucwel consistency; it does not sag.
Strong adhesion to structures such as concrete, metal, wood, stone.
Does not shrink, does not precipitate and sediment, can be applied in dry or slightly humid environments.
Provides impermeability against mineral oils, petroleum and acids.
High resistance to seawater, diesel, gasoline, cleaning materials.
Resistant to vibration, impermeable to water and gas.
No primer required.
Conveniently used for reinforcement and anchoring works, can be opened to pedestrians in 24 hours and heavy traffic in 7 days.

Clean the surface to remove oil, rust, and paint.
Roughen the surface if needed, based on the condition of the concrete.
Clean and add new reinforcement if existing reinforcement is rusty.
Apply to concrete that is at least 28 days old and has a dry or slightly damp surface.
Use sand or a brush to remove any debris from steel surfaces until shiny metal is visible.

Component B is added into component A and mixed with a low-speed mixer for 3-4 minutes.
Consider the pot life of the material should be mixed as necessary. At high temperatures, the pot life of the materials is reduced.

Apply NOTTEPOX R555 to the surface using a spatula or trowel immediately after mixing. Each layer should have a thickness between 2-30 mm.
Apply additional coats once the previous layer has hardened (after 18-24 hours).
If immediate application to a metal surface is not possible, use a primer.
When bonding two materials, apply the product to both surfaces. After applying the desired thickness, press the bonded parts together until polymerization is complete.

Packaging: 5 kg Tin (set: 3.75 kg (A) + 1.25 kg (B))
Storage Conditions: In its original packaging, when stored in ventilated, dry and protected environments at +5°C to +25°C, protected from sun, rain, and frost, its shelf life is 1 year from the date of manufacture.

Gloves, protective clothing, masks/goggles should be used during mixing and application, and contact of the product with eyes, mouth, and skin should be prevented.
In case of contact with skin, it should be washed with plenty of water, and in case of contact with eyes and swallowing, a doctor should be consulted.