Nottepox P400

Description

NOTTEPOX P400 is an epoxy resin based, two component, low viscosity, solvent-free primer material that can easily adhere to even moist concrete and mineral surfaces.

Usage Areas

Indoors and outdoors, On damp surfaces,
On concrete and cement-based mineral surfaces,
As a primer layer in epoxy floor coating applications,
As a primer layer before the application of polyurethane and polyurea waterproofing materials,
Bonding of epoxy based levelling mortars and mortar coatings,
When mixed with aggregate, it can be used as filler and repair mortar.

Characteristics

It can easily adhere even to damp surfaces.
It does not contain solvent and can be used indoors safely.
Thanks to its low viscosity structure, it has excellent penetration feature.
It has high chemical resistance.
It is easy to apply.

Application Method

Before floor covering, the surface must be free from rust, oil, grease and dust.
The area to be applied should be scraped and made ready for coating.

Component A is slowly mixed with an epoxy resin stirrer, then component B is slowly added to component A and stirred at low speed for 3-4 minutes until a homogeneous mixture is obtained.

Apply the prepared primer mixture to the surface using a roller, trowel, or rake.
It can also be used as mortar by mixing with a moisture-tolerant epoxy primer aggregate.
Use the mixture within 30 minutes.
The waiting time between layers is 6 to 12 hours, depending on the weather conditions.
Final curing takes 7 days.
After application, protect the surface from water contact for at least 1 day.

Consumption

300 – 500 gr/m²

Packaging and Storage

17,5 kg Tin (Set: Component A: 12,5 kg + Component B: 5 kg)
It should be stored in its original unopened packaging in a cool and dry environment, protected from frost.
Suitable storage temperature should be between +10 and +25 °C.
Shelf life is 12 months from the date of manufacture under appropriate storage conditions.

Safety Precautions

Contact of the product with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water. If swallowed, drink a few glasses of water immediately and seek medical advice. In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained. Gloves and protective goggles should be used during use.

Technical Data

Property	Value
Content	Epoxy
Density	1.00 – 1.10 (g/cm³; 23°C)
Adhesion strength	>2.2 N/mm²
Mixture Hardness	90 (min., 23°C, 200 g)
Shore A Duration	30 – 25
Top Coat Application Time	4 – 24 hours
Full Curing	7 days