Nottepox P355

Description

NOTTEPOX P355 is a pure epoxy-based, two-component, low-viscosity primer used in epoxy systems.

Usage Areas

Indoors and outdoors.
On concrete and cement-based mineral surfaces,
As a primer layer in epoxy floor coating applications,
As a primer layer before the application of polyurethane and polyurea waterproofing materials,
Bonding of epoxy based levelling mortars and mortar coatings,
To protect concrete surfaces against wear and dust.

Characteristics

Their mechanical strength is high.
It does not shrink. (non-shrink)
It does not contain solvent.
It can be used indoors and outdoors.
It has high and structural bonding power.
It provides impermeability in the structure it is applied.
It is resistant to chemicals such as petroleum, oil, acid and alkali.
It can be applied to surfaces such as concrete, wood, stone.

Application Method

Concrete surfaces must be dry, clean, and free from dust.
Remove any damaged or loose concrete parts.
The surface should have a minimum compressive strength of 25 N/mm² and a minimum tensile strength (pull-off) test result of 1.5 N/mm².
New concrete should be at least 28 days old and dry.
Repair any large breaks or defects beforehand. Remove the cement shell and shiny screed on the surface using tools like sandblasting or grinding to roughen the surface.
Ensure the entire surface is dust-free.
Prior to coating, concrete surfaces in contact with the soil should be insulated with water and water vapor breakers.

NOTITEPOX P355 has two components. (A+B) Component B is added to component A and mixed with the mixer for 4-5 minutes.
The pot life of the mixed material is around 30 minutes.
As the ambient temperature rises, the pot life decreases.

It is applied to the surface by roller, brush or spray.
The amount can be increased according to the absorbency of the surface.
It should be waited for 3-4 hours between layers.
Epoxy coatings should be applied within 5-15 hours.

Consumption

400 – 700 gr/m²

Packaging and Storage

21 kg Tin (Set: Component A: 15 kg + Component B: 6 kg).
It should be stored in its original unopened packaging in a cool and dry environment, protected from frost. Suitable storage temperature should be between +5 and +25 °C.
Shelf life is 12 months from the date of manufacture under appropriate storage conditions.

Safety Precautions

Gloves, protective clothing, masks/goggles should be used during mixing and application, and contact of the product with eyes, mouth and skin should be prevented. In case of contact with skin, it should be washed with plenty of water, and in case of contact with eyes and swallowing, a doctor should be consulted.

Technical Data

Property	Value	Remarks
Specific gravity	~1.10 kg/l
Working time	~30 minutes
Adhesion strength	2.2 N/mm²
Shore A hardness	90 ± 5
Application temperature	+10°C / +30°C
Tack free drying time	24 hours (+20°C)
Final drying	7 days (+25°C)