Nottefix SM810

Description

Single-component, antibacterial silicone sealant for versatile sealing and grouting applications. It is non-corrosive, compatible with alkali and cement surfaces, and resistant to sagging. The sealant prevents spore formation and inhibits mold growth in humid or poorly ventilated areas. It offers UV and weather resistance, maintaining performance in temperatures from -40°C to 150°C.

Usage Areas

Suitable for indoor and outdoor applications.
Ideal for wet areas, window and door systems, kitchens, and various DIY projects.
Versatile usage in cars, boats, vans, and houses.
Can be used for filling expansion joints in internal areas.

Characteristics

Material content: Silicone
Type: Mastic
Color: Transparent/White
Density: 1.01 g/cm³
Excellent adhesion on concrete, cementitious, and aluminum surfaces, ideal for professional applications.
No pore formation during drying, odorless.
Full performance at low and high temperatures.
Non-sagging and highly durable.
Ideal for DIY applications, 100% silicone.

Application Method

Surface must be clean for proper sealant bonding.
Surfaces should be free from dust, dirt, grease, and contaminants.
Surfaces should be mature, sound, stable, smooth, and dry.
Impervious surfaces (glass, vitrified wares, etc.) should be cleaned with a solvent before application.
Wipe off excess solvent before it dries.
Priming may be required for enhanced bonding, depending on the surface format.

Tape the sides of the joint to prevent sealant contamination.
Apply the sealant using a sealant gun.
Cut the tip of the cartridge diagonally according to the joint width.
Apply an adequate amount of sealant into the joint.
Smooth the surface with a sealant spreader or spatula before the sealant forms a skin.
Remove the masking tapes after application.
Wet sealant remains can be cleaned with a cloth, while dried remains require mechanical cleaning.

Consistency: Non-sag
Application Tool: Sealant gun
Application Temperature: +5°C to +40°C
Set Time (Initial/For Contact): Minimum 10 minutes
Set Time (Formation of Surface Film): Minimum 25 minutes

Consumption

The approximate coverage amount may vary depending on the application thickness: 10-12 linear meters / 280 ml cartridge.

Packaging and Storage

Packaging: Plastic Cartridges of 280 ml (25 cartridges in a box).
Storage Conditions: Store the unopened product in a cool, dry place above +5°C. It has a shelf life of 18 months from the manufacturing date indicated on the packaging. Opened cartridges should be tightly closed to avoid air contact. Do not use the product after the expiration date, unless quality control tests confirm its suitability.

Safety Precautions

Not suitable for acid-sensitive surfaces, including aluminum, metals, polished marbles, or limestone.
Avoid contact with cementitious, EPDM, APTK, and neoprene surfaces.
Pre-test on a spared surface area for resistance to climatic effects.
Not for bonding glazed surfaces or use in aquariums.
Not paintable. Longer curing time in low temperatures, high humidity, and poorly ventilated areas. Take precautions to prevent contact with skin and eyes.

Technical Data

Property	Value
Extrusion Rate	300 ml/min (23°C, 3mm nozzle, 650 N/mm²)
Tensile Strength	0.7 N/mm² (ISO 8339)
Ultimate Elongation	300% (ISO 8339)
Hardness (Shore A)	23 (ISO 868)
Modulus (100% Flexion)	0.4 N/mm² (ISO 8339)
Resistance to Thermal Shocks	-40°C to +150°C