Nottefix SM610

Description

Single-component, general-purpose, hygienic acetic-curing silicone sealant. It is suitable for sealing the joints between materials and coverings. The sealant does not sag during or after application and prevents the formation of pores on the surface during curing. It effectively inhibits mold growth in areas exposed to excessive humidity or lacking ventilation. The silicone sealant exhibits full performance and elasticity even in extreme temperatures, ranging from as low as -40 °C to as high as 100 °C.

Usage Areas

Suitable for indoor applications of wet areas, window and door systems, kitchens, and various DIY applications.

Characteristics

Silicone-based mastic sealant, transparent/white color, density 0.98 g/cm³.
Multipurpose with excellent adhesion to vitrified surfaces.
No pore formation during curing.
High durability, solvent-free, non-sagging.
Full performance at low and high temperatures.

Application Method

To ensure proper bonding, the surface must be clean.
Remove any dust, dirt, grease, or other contaminants that may act as a barrier.
Surfaces should be mature, sound, stable, smooth, and dry.
Impervious surfaces such as glass or vitrified wares should be cleaned using a solvent-based cleaning material.
Make sure to wipe off the material from the surface before it dries.
Depending on the surface condition, priming may be necessary to enhance bonding.

To prevent excessive sealant from contaminating the surrounding surface, tape the sides of the joint for masking.
Use a sealant gun to apply the sealant.
Insert the cartridge into the gun and cut off the tip diagonally, considering the width of the joint.
Apply an appropriate amount of sealant into the joint.
Smooth the surface using a sealant spreader or spatula before the sealant forms a skin.
After application, remove the masking tapes.
Wet sealant residue can be easily cleaned with a cloth, while dried residue may require mechanical cleaning.

Consistency: Non-sag
Application tool: Sealant gun
Application temperature: +5°C to +40°C
Initial set time (for contact): Minimum 10 minutes
Formation of surface film set time: Minimum 25 minutes

Consumption

The approximate coverage amount may vary depending on the application thickness: 10-12 linear meters / 280 ml cartridge.

Packaging and Storage

Packaging: 280 ml, 330 g cartridges (25 cartridges in a box)
Storage Conditions: Store the unopened product in a cool, dry place above +5°C. It has a shelf life of 18 months from the manufacturing date indicated on the packaging. Opened cartridges should be tightly closed to avoid air contact. Do not use the product after the expiration date, unless quality control tests confirm its suitability.

Safety Precautions

Not suitable for acid-sensitive surfaces, including aluminum, metals, polished marbles, or limestone.
Avoid contact with cementitious, EPDM, APTK, and neoprene surfaces.
Pre-test on a spared surface area for resistance to climatic effects.
Not for bonding glazed surfaces or use in aquariums.
Not paintable. Longer curing time in low temperatures, high humidity, and poorly ventilated areas. Take precautions to prevent contact with skin and eyes.

Technical Data

Property	Value
Extrusion rate	800 ml/min (@23°C, 3 mm nozzle, 650 N/mm²)
Tensile strength	0.6 N/mm² (ISO 8339)
Ultimate elongation	200% (ISO 8339)
Hardness (Shore A)	18 (ISO 868)
Modulus (100% flexion)	0.36 N/mm²
Tear strength	4.0 N/cm (ISO 34 method C)
Resistance to thermal shocks	-40°C / +100°C