Nottefix POLY CA

Description

NOTTEFIX POLY CA is a pure polyurea-based, two-component, cold-applied waterproofing coating with high elasticity and adhesion strength.

Usage Areas

Terraces and balconies
Water tanks
Wet volumes
Reinforced concrete structures
Metal Surfaces

Characteristics

It cures quickly.
It has high adhesion strength to different surfaces.
It does not prevent the passage of water vapor.
It can be applied horizontally and vertically.
It has a high crack covering capacity.
Jointless coating is applied.

Application Method

Before application, the surface should be free from adhesive substances such as dust, oil, paint, curing.
Defective places and gaps on the surface should be repaired with appropriate materials and the surface should be leveled.
The humidity on the surface should not be above 4%.
The concrete should be at least 28 days old and have a strength of at least 15 N/mm².
Before application, the surface should never be watered and the surface should be dry.

Primering before application:

Bright and glossy surfaces should be primed with NOTTEPUR P150.
Concrete surfaces should be primed with NOTTEPUR P140 or NOTTEPOX P355.
The material should be applied within 12 hours after priming.

Stir components A and B separately in their containers using a low-speed mixer for 2-3 minutes.
Combine the components and mix them in a low-speed mixer for 3-4 minutes.
Do not walk on the applied material for 24 hours after application.
To provide direct UV resistance and prevent color yellowing in outdoor applications, NOTTEPUR 1KCA can be applied to the fully dried product.

Avoid applying the product in extremely hot, rainy, or windy weather.
Do not apply the product if the ambient and surface temperature is below +5°C or above +35°C.
In extremely cold weather, use heaters to increase the ambient and ground temperatures.
Condition the packages at +20°C before use to improve the workability of the material.

Consumption

1.5 – 2.0 kg / m² (2 coats)

Packaging and Storage

26.5 kg Tins (set)
Component A: 25 kg – Component B: 1.5 kg
In its original packaging, when stored in ventilated, dry, and protected environments at +5°C/+25°C, protected from sun, rain, and frost, its shelf life is 1 year from the date of manufacture.

Safety Precautions

Gloves, protective clothing, masks/goggles should be used during mixing and application, and contact of the product with eyes, mouth, and skin should be prevented. In case of contact with skin, it should be washed with plenty of water, and in case of contact with eyes and swallowing, a doctor should be consulted.

Technical Data

Property	Value
Material Structure	Pure Polyurea
Specific Gravity	1.30 ± 0.05 gr/cm³
Hardness (Shore A)	90 (ASTM D2240)
Elongation at Break	> 600% (ASTM D638)
Tensile Strength	> 9 N/mm² (ASTM D638)
Adhesion to Concrete	> 2 N/mm²
Breaking Strength	> 13 N/mm²
Heat Resistance	-40°C / +80°C
Surface Transition	0.8 gr/m² hour (ASTM EP96)
Resurfacing	4-6 hours
Final Curing	24 hours
Color	Grey