Nottefix LUB 20

Description

NOTTEFIX LUB20 is a special blend prepared with high-quality mineral oils and chemicals. It is used to facilitate the separation of steel molds from concrete, to ensure that the molds are easily and quickly disassembled and cleaned, and to obtain a smooth concrete surface.

Usage Areas

On all kinds of non-absorbent surfaces,
In steel molds,
In plastic molds.

Characteristics

It provides easy disassembly of the formwork and obtains smooth-surface concrete.
It facilitates placing the concrete in the mold and removing air bubbles and facilitates the cleaning of the mold.
It increases the efficiency and life of the mold in which it is used, significantly reducing the cost of molding and workmanship in structures.
It does not pose an adherence problem, so it eliminates the use of paint and pre-plaster primer on concrete surfaces.

Application Method

The molds must be clean before using the mold oil.
The application is performed homogeneously on the mold surface in a single layer with a brush, roller or spray.
In order to achieve the best performance, it should be ensured that the product forms a thin film layer.
Excessive oil on the surface should be removed with sponge, cloth, etc. as excessive use of oil may cause staining in the concrete.
Newly applied formwork surfaces should be protected from rain before concrete pouring.

Consumption

Depending on the condition, surface, type and separation method of the mold, 25–30 m² surface is covered with 1 lt.

Packaging and Storage

30 lt Plastic drum.
Shelf life is 1 year when stored in its original packaging at +5°C / +25°C in dry, protected and ventilated environments, protected from direct sunlight and frost. If no water is added, it is not affected by frost.

Safety Precautions

Contact of the product with the skin and eyes should be prevent- ed, and in case of contact, it should be washed with plenty of water. If swallowed, drink a few glasses of water immediately and seek medical advice. In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained.
Gloves and protective goggles should be used during use.