Nottefix LS150

Description

NOTTEFIX LS150 is a water-based, high lithium silicate, ready to use liquid surface hardener that can be applied on old and new concrete surfaces.

Usage Areas

Indoor and outdoor areas.
Concrete floors, cement-based screeds, tile and stone floors, which are desired to be hardened and not to be dusted.
In factories, industrial sites and workshops.
In warehouses and garages, in aircraft hangars and heliports.

Characteristics

It increases the resistance of concrete and cement based floors to dusting and abrasion.
The applied surface has a silky and shiny appearance.
It creates a waterproof, dust-proof surface after curing.
It prevents permanent and effective durability on the surface.
It provides cracks that may occur on the concrete surface.
It is impermeable to water vapor.
It is environmentally friendly.

Application Method

Surfaces to be applied should be intact, self-carrying, dry, clean and free from anti-stick materials such as dust, oil, paint, curing material, detergent, mold oils and silicone.

NOTTEFIX LS150 is a ready-to-use product applied on freshly poured concrete or screed.
Apply with a brush, roller, or spray gun as a single layer, filling the pores adequately.
After application, the surface should appear wet for 15-20 minutes.
If rapid drying occurs, additional layers may be necessary.
The surface is ready for use 1-2 hours after application.
The final curing process takes 7 days to complete.

Use concrete with a minimum grade of C20/25 and screed with a minimum grade of EN 13183 CT-C25-F4 for the application.
For quicker shine, dry or wet polishing can be performed using a polishing machine.
Take precautions as it may be harmful to the skin upon contact.
Avoid applying in frosty or potentially frosty weather conditions.
Protect the applied surface from rain, frost, pedestrian traffic, and high humidity until it is completely dry.
Do not apply when the surface and ambient temperatures fall below +5°C or above +35°C.
Consumption on new surfaces can be higher due to the absorbenсy conditions.
Do not allow traffic on the surface for 24 hours after application.

Consumption

100-200 g/m² depending on surface width due to the absorbenсy conditions. The porous or small increases due to concrete quality.

Packaging and Storage

30 kg Plastic drum.
In its original packaging, when stored in ventilated, dry and protected environments at +10°C/+30°C, protected from sun, rain and frost, its shelf life is 1 year from the date of manufacture.

Safety Precautions

During application and mixing, contact of the material with the skin and eyes should be prevented. In case of contact with eyes, they should be washed with plenty of water, and in case of contact with skin, they should be washed immediately with plenty of water and medical assistance should be obtained. Gloves, protective clothing/mask / goggles should be used during use.

Technical Data

Technical Data	Specification
Color	Transparent
Application Temperature	+5°C to +35°C
Solid Content Ratio	15%
pH	11
First drying	2 hours
Final drying	7 days
Burning point	Non-flammable
Density	1.10 g/cm³