Nottefix BUTYL BAND
Description
It is a butyl-based, self-adhesive joint insulation band used in corner insulation on structural cold joints and wet floors. The upper part is covered with non-woven felt, divided in half.
Usage Areas
- Many different surfaces such as concrete, ceramic, plastic, glass, metal, wood, bitumen, polycarbonate, gypsum boards.
- In wet areas.
- Indoortiles, ceramics, plate coatings.
- At ground-wall junctions.
Characteristics
- Self-adhesive, easy to apply.
- Highly adhesive.
- Elastic.
- 100% waterproof.
- Suitable for use on many surfaces such as bitumen, cement, and ceramics.
- Suitable for use even at low temperatures.
Application Method
- The joint surface to be applied should be free from dust, oil, paint, curing, and other substances that will prevent adhesion.
- The surface should be firm, flat, and dry.
- The silicone paper layer on the back of the band is peeled off and pressed by a roller or hand to ensure full adhesion to the surface.
- The overlap of the band should be 5 cm.
- Insulation materials applied on it.
- The material must be protected from direct UV rays.
Dimensions
| BUTYL BAND | Width (mm) | Thickness (mm) |
|---|---|---|
| BUTYL 50 | 50 | 1 |
| BUTYL 100 | 100 | 1 |
| BUTYL 120 | 120 | 1 |
| BUTYL 150 | 150 | 1 |
Consumption
Packaging and Storage
- In its original package, it has a shelf life of at least one year when stored in a ventilated, dry, and protected environment at +5°C/+25°C.
- Protected from sun, rain, and frost.
- The material is not affected by frost, but at temperatures above +50°C, it becomes difficult to separate the material from the silicone paper layer.
Safety Precautions
- Protective gloves, glasses, and clothing should be used during application.
- Contact of the product with eyes and mouth should be avoided.
- If swallowed, a doctor should be consulted.
Technical Data
| Property | Value |
|---|---|
| Chemical structure | Butyl |
| Dry matter | 100% |
| Solvent | Free |
| Application temperature | 0°C / +40°C |
| Service temperature | -30°C / +90°C |
| Elongation | >70% (EN 12311-1) |
| Resistance to water pressure | 0.2 bar (EN 1928-B) |
| Peeling test | ≥ 90 N/50mm (ASTM D100) |
| Vertical yield | ≥ 100 N/50mm (EN 12311-1) |
Note: The above values are given at +20°C and for 50% relative humidity. High temperatures shorten the time, low temperatures prolong the time.
Application Areas
