Nottefix 1019

nottefix-1019-tds

Description

Acrylic-based ready-mixed tile adhesive for versatile tile fixing on walls and floors. Offers improved adhesion, flexibility, and non-slip properties. Ideal for various tile types, including ceramics, porcelain, glass mosaics, natural stones, marbles, terracotta, and thermal insulation materials. Easy and efficient tiling solution.

Usage Areas

Suitable for both vertical and horizontal applications, indoors and outdoors.
Ideal for tiling in wet areas, ensuring water resistance.
Specifically designed for tiling on various surfaces, including: Cement-based chipboards, Precast concrete, Gypsum board, Gypsum plastered wooden surfaces.
Suitable for fixing tiles with water absorption rates exceeding 3% on painted or existing tile surfaces.

Characteristics

Provides excellent tiling results on gypsum-based boards and plasters, cement-based chipboards, and precast concrete surfaces.
Suitable for all types of porcelain tiles, natural stones, and marbles.
Facilitates easy and quick tiling during renovation and repair projects.
Offers non-slip properties, making it ideal for wall tiling.
Exhibits high flexibility and resistance to frost, moisture, and thermal shocks.

Application Method

Prior to adhesive application, the substrate must be clean and free from dust, dirt, grease, or any other contaminants.
Hardened or polished surfaces, as well as concrete laitance, should be removed through scabbling.
It is essential to ensure that the substrate is mature, sound, stable, and either smooth or damp. The relative humidity of the substrate should be below 5%.
For high porosity substrates like gypsum plasters, priming is necessary before tile fixing.
Surfaces exposed to direct sunlight and with a surface temperature above +35°C should be cooled by dampening.

The adhesive comes in a ready-mixed paste form, eliminating the need for mixing.
It can be directly applied for tiling without adding any additional additives such as water or latex into the ready-mixed paste.

Apply adhesive using a notched trowel, ensuring proper bed thickness.
Test for staining and shading with transparent and light-colored tiles.
Press tiles within adhesive’s open time, hammer gently for stability, and check contact.
Clean excess adhesive promptly.
Allow 24 hours before applying joint filler.

Use adhesive within the temperature range of +5°C to +35°C.
Ensure application surface temperature is above +5°C and free from freezing risk.
Avoid applying adhesive on hot surfaces and during sunny/windy weather.

Consumption

The coverage amount (kg/m²) may vary based on factors such as the application surface, tile size, and the type of trowel used.

Trowel Size	Single Bonding	Double Bonding
V5 (5×5 mm)	2 kg/m²	3 kg/m²
V6 (6×6 mm)	2.5 kg/m²	3.5 kg/m²

Packaging and Storage

10 kg Plastic Buckets
Store the unopened product in a cool, dry place above 5°C.
Shelf life is 12 months from the manufacturing date.
Avoid damp or submerged storage.
Close opened packages tightly to prevent air contact.

Safety Precautions

Prevent contact of the product with the skin and eyes.
If contact occurs, wash with plenty of water.
In case of ingestion, drink water and seek medical advice.
If the product comes into contact with the eyes, wash immediately with water and seek medical assistance.
Use gloves and protective goggles during use.

Technical Data

Properties	Values
Tensile strength after 14 days	≥ 1.0 MPa (N/mm²)
Aging with heat	≥ 1.0 MPa (N/mm²)
Aging with water	≥ 0.5 MPa (N/mm²)
Slipping	≤ 0.5 mm
Flexibility	Excellent
Resistance to alkalis	Limited
Resistance to thermal shocks	-30°C to +70°C
Resistance to moisture	Good