Nottefix 1015
Description
Rapid-setting, flexible tile adhesive for fixing ceramic, porcelain, glass, natural stone, and more. Ideal for quick restoration and repair projects, providing improved adhesion and non-slip application.
Usage Areas
- Suitable for use in internal and external, vertical and horizontal fixing applications.
- Ideal for tiling in wet areas, terraces, and wide areas.
Characteristics
- Material content: High-quality cement, additives providing rapid set feature and flexibility and improved adhesion.
- Type: Powder
- Color: Grey/white
- Density: 1.3 gr/cm³
Application Method
- Clean and prepare the substrate to ensure proper adhesive bonding.
- Remove any dust, dirt, grease, or other contaminants from the surfaces.
- Scabbling is necessary to eliminate hardened or polished surfaces and laitance.
- Ensure the substrate is mature, sound, stable, and smooth, with appropriate moisture content.
- Prime high porosity substrates, such as gypsum plasters.
- If surfaces are exposed to direct sunlight and have a temperature above +25°C, cool them by damping.
- Gradually add 4.8–5.6 liters (24–26%) of clean water to 20 kg of powder and mix until smooth.
- Use a low-cycled electrical drill mixer for mixing.
- The paste should have a non-flowing consistency when handled with a trowel.
- Allow the paste to rest for 3 minutes before application, then remix before use.
- Apply adhesive with a notched trowel, including tile back for larger sizes.
- Press tiles firmly with twisting and sliding action for good contact.
- Gently hammer tiles with a rubber hammer for stability and full coverage.
- Remove excess adhesive before it hardens.
- Test for stains on light-colored tiles; use white adhesive if needed.
- Fill joints at least 6 hours after adhesive application.
- Adhesive should be used within the temperature range of +5°C to +25°C.
- Ensure the application surface temperature is above +5°C and free from freezing risks.
- Avoid applying the adhesive on hot surfaces or during sunny and windy weather conditions.
Consumption
The approximate coverage amount (kg/m²) may vary depending on the application surface, tile size, and the type of trowel.
- U6 (6x6x6 mm): 3–4 kg
- U9 (9x9x9 mm): 4–5 kg
Packaging and Storage
- 20 kg craft bag.
- Shelf life when stored in its original packaging at +10°C / +30°C in dry, protected, and ventilated environments, protected from sun, rain, and frost, is 12 months from the date of manufacture.
Safety Precautions
To ensure safety during use:
- Avoid skin and eye contact with the product.
- In case of contact, wash with plenty of water.
- If swallowed, drink water and seek medical advice.
- If the product comes into contact with the eyes, rinse immediately with plenty of water and seek medical assistance.
- Wear gloves and protective goggles when handling the product.
Technical Data
| Property | Value |
|---|---|
| Tensile strength after 28 days | ≥ 1.0 MPa (N/mm²) |
| Aging with heat | ≥ 1.0 MPa (N/mm²) |
| Aging with water | ≥ 1.0 MPa (N/mm²) |
| Freeze–thaw cycle | ≥ 1.0 MPa (N/mm²) |
| Extended open time (30 mins) | ≥ 1.0 MPa (N/mm²) |
| Slipping | ≤ 0.5 mm |
| Flexibility | Excellent |
| Resistance to acids and alkalies | Good |
| Resistance to thermal shocks | -30°C – +70°C |
Note: The above values are given at +20°C and for 50% relative humidity.
High temperatures shorten the time, and low temperatures prolong the time.
Application Areas
