Nottefix 1012
Description
Nottefix 1012 Is A High Performance Polymer Reinforced Flexible, Extended Adhesive Mortar In Grey And White Color Used In Ceramic, Marble And Granite Adhesion On Concrete Screed And Plaster.
Usage Areas
- In Indoor And Outdoor Areas, On Horizontal And Vertical Surfaces,
- In Ceramic, Granite And Marble Applications,
- Terraces And Balconies,
- Adhesion Of Large Size Ceramics
- Areas With Intense Pedestrian Traffic Such As Shopping Mall, School, And Hospital.
Characteristics
- It Has Extended Working/Application Time.
- It Does Not Sag Or Collapse.
- It Is Flexible And High Adhesive Strength.
- It Is Resistant To Stresses And Vibrations Arising From Freezing, Thawing And Temperature Differences.
- It Has High Adhesion Strength.
- It Is Watertight.
Application Method
- Ensure that the surface to be applied is solid and clean.
- Conduct surface repairs at least 24 hours in advance and remove any materials that may hinder mortar adhesion, such as oil, paint, or powder.
- If the surface temperature is above 30°C, moisten the surface and avoid exceeding 2% of the surface moisture rate during application.
- On plaster or anhydrous surfaces, ensure that the moisture content does not exceed 0.5%.
- For absorbent surfaces like gypsum, apply NOTTEPRIME P400 as a primer.
- 25 kg powder material is added to ~6.50 lt water.
- The required amount of water is placed in a clean bucket.
- The necessary powder product is added on it and is mixed with the mixer for 3–5 minutes until a homogeneous and lump-free mortar is obtained.
- After the material is rested for 5 minutes, it is ready to apply.
- With a suitable notched trowel (U8X8 or U10X10), NOTTEFIX 1012 is applied on the surface.
- The application is completed by leaving joints (joints should be 3mm in 5x5cm ceramic, 4mm in ceramic up to 15x15cm, 6–8 mm in ceramic over 15x15cm).
- Ceramics should be placed within 15–20 minutes after applying NOTTEFIX 1012 mortar.
- Do not apply the material if the ground temperature is below +5°C.
- Protect the material from rain, frost, and direct sunlight for the first 12 hours after application.
Consumption
| Ceramic Size | Joint | Consumption (kg/m²) |
|---|---|---|
| >10×10 cm | 6 mm | 4–5 |
| >15×15 cm | 8 mm | 4.5–5.5 |
| >30×30 cm | 8 mm | 5–6.5 |
| <30×30 cm | 10 mm | 5.5–7 |
Packaging and Storage
- Packaging: 25 kg craft bag.
- Storage: Shelf life when stored in its original packaging at +10°C / +30°C in dry, protected, and ventilated environments, protected from sun, rain, and frost, is 12 months from the date of manufacture.
Safety Precautions
- Gloves, protective clothing, and masks/goggles should be used during mixing and application.
- Contact of the product with eyes, mouth, and skin should be prevented. In case of contact with skin, it should be washed with plenty of water. In case of contact with eyes and swallowing, a doctor should be consulted.
Technical Data
| Property | Value |
|---|---|
| Water Mixture Ratio | ~24–28% of powder product |
| Initial Tensile Strength | ≥1 N/mm² |
| Tensile Strength After Immersion in Water | ≥1 N/mm² |
| Tensile Strength After Heat Aging | ≥1 N/mm² |
| Tensile Strength After Freeze–Thaw Cycle | ≥1 N/mm² |
| Tensile Strength After Open Hold Time | ≥0.50 N/mm² |
| Slipping | ≤7 mm |
| Open Time | 3 hours |
| Grouting Time | 24 hours |
| Working/Application Time | 40 minutes |
| Service Temperature | -20°C / +80°C |
| Ground Temperature | +5°C / +30°C |
| Mortar Thickness | 3–8 mm |
| Color | Grey, white |
Note: The above values are given at +20°C and 50% relative humidity. High temperatures shorten the time; low temperatures prolong the time.
Application Areas
