Nottefix 1011
SKU: 382440000000
Description
NOTTEFIX 1011 is a high-performance polymer-reinforced flexible adhesive mortar in grey and white color used in ceramic, marble, and granite adhesion on concrete screed and plaster.
Usage Areas
- Indoor and outdoor areas on horizontal and vertical surfaces.
- Ceramic, granite, and marble applications.
- Terraces and balconies.
- Adhesion of large-size ceramics.
Characteristics
- It does not sag or collapse.
- It is flexible.
- It is resistant to stresses and vibrations arising from freezing, thawing, and temperature differences.
- It has high adhesion strength.
Application Method
- Ensure the surface to be applied is solid and clean.
- Conduct surface repairs at least 24 hours in advance and remove any materials that hinder mortar adhesion, such as oil, paint, and powder.
- If the surface temperature exceeds 30°C, moisten the surface and avoid exceeding 2% of surface moisture during application.
- Plaster or anhydrous surfaces should have a moisture content not exceeding 0.5%.
- Apply NOTTEPRIME P400 as a primer for absorbent surfaces like gypsum.
- 25 kg of powdered material is added to ~6.50 lt water.
- The required amount of water is placed in a clean bucket.
- Add the necessary powder product and mix with a mixer for 3–5 minutes until a homogeneous and lump-free mortar is obtained.
- Let the material rest for 5 minutes; it will then be ready to apply.
- Apply NOTTEFIX 1011 on the surface using a suitable notched trowel (U8x8 or U10x10).
- Complete the application by leaving joints according to the size of the ceramic tiles:
- 3 mm joints for 5×5 cm ceramics.
- 4 mm joints for ceramics up to 15×15 cm.
- 6–8 mm joints for ceramics larger than 15×15 cm.
- Ceramics should be placed within 15–20 minutes after the application of NOTTEFIX 1011 mortar.
- In cases where the ground temperature is below +5°C, the material should not be applied.
- The surface must be protected from rain, frost, and direct sunlight within the first 12 hours after application.
Consumption
| Ceramic Size | Joint | Consumption |
|---|---|---|
| >10×10 cm | 6 mm | 4–5 kg/m² |
| >15×15 cm | 8 mm | 4.5–5.5 kg/m² |
| >30×30 cm | 8 mm | 5–6.5 kg/m² |
| <30×30 cm | 10 mm | 5.5–7 kg/m² |
Packaging and Storage
- Packaging: 25 kg craft bag.
- Shelf Life: 12 months from the date of manufacture when stored in its original packaging at +10°C / +30°C in dry, protected, and ventilated environments, protected from sun, rain, and frost.
Safety Precautions
- Gloves, protective clothing, and masks/goggles should be used during mixing and application.
- Prevent contact with eyes, mouth, and skin.
- In case of contact with skin, wash with plenty of water.
- If swallowed or if there is contact with eyes, seek medical advice.
Technical Data
| Parameter | Value |
|---|---|
| Water Mixture Ratio | ~24–28% of powder product |
| Initial Tensile Strength | ≥1 N/mm² |
| Tensile Strength After Immersion in Water | ≥1 N/mm² |
| Tensile Strength After Heat Aging | ≥1 N/mm² |
| Tensile Strength After Freeze–Thaw Cycle | ≥1 N/mm² |
| Tensile Strength After Open Hold Time | ≥0.50 N/mm² |
| Slip | ≤5 mm |
| Operation Time | 3 hours |
| Grouting Time | 24 hours |
| Mortar Coating Time | 30 minutes |
| Service Temperature | -20°C / +80°C |
| Ground Temperature | +5°C / +30°C |
| Mortar Thickness | 3–8 mm |
| Color | Grey, White |
Application Areas
