Notteproof B1K

Description

NOTTEPROOF B1K is a one-component waterproofing coating based on bitumen rubber, cold applied, with high elasticity.

The surface to be applied should be dry and clean. It should be free from anti-stick substances such as dust, oil, paint, curing.
Mortar residues, loose floors have to be cleaned, cracks and broken areas have to be repaired, and the surface level has to be leveled.
The corners and edges should be chamfered with a minimum radius of 4 cm.

For priming, 1 kg NOTTEPROOF B1K can also be applied as a primer to the surface by mixing with 400–600 rpm mixer with 4 lt water.
After the primer is dried, it is started to be applied.

The product is made ready for use by mixing with a mixer for at least 2 minutes at 400–600 rpm.
It can be applied with a brush and roller or by spraying with suitable machines.
The second coat is applied after the first coat is dried.
Appropriate mesh or reinforcement seal reinforcement can be made in large area applications and when necessary.

Protect surfaces with NOTTEPROOF B1K from UV and sharp parts.
Use reverse roof detail and ensure the terrace has a solid, sloped concrete slab of minimum 12 cm thickness.
Use appropriate drainage plates and thermal insulation plates to protect the foundation pit before filling it.
Strictly multi-porous, distorted, or perforated surfaces with NOTTEPROOF B1K to prevent air bubble formation and/or smooth the surface.
Add water up to 3% of the material amount to prevent consistency issues in hot weather.
Protect exterior surfaces from wind and frost for 48 hours and do not expose to water until dry.
Use water inflatable tapes or PVC water retaining tapes for cold joint insulation at foundation and wall joints.
Do not apply NOTTEPROOF B1K on metal surfaces.

20 kg Plastic Bucket
Store in its original packaging, in ventilated, dry, and protected environments at +5°C/+25°C, protected from sun, rain, and frost.
Shelf life is 1 year from the date of manufacture.

Gloves, protective clothing, masks/goggles should be used during mixing and application.
Contact of the product with eyes, mouth, and skin should be prevented.
In case of contact with skin, it should be washed with plenty of water, and in case of contact with eyes and swallowing, a doctor should be consulted.