Notteproof ACR TR

Description

NOTTEPROOF ACR TR is a thermoplastic acrylic-based, two-component, self-liquid, ready-to-use, UV resistant, transparent coating and waterproofing material.

Usage Areas

On balconies and terrace roofs with light pedestrian traffic.
On balconies and terraces covered with materials such as glazed tiles, ceramics, natural stone, marble, tiles.
On reinforced concrete surfaces, plasters, and screed.
On glass, on glass brick, on metals such as iron, steel, aluminum.

Characteristics

It is transparent and does not damage the existing coating, allowing waterproofing without changing the appearance of the bottom coating.
It is decorative.
It does not contain materials like silicone oil and plasticizer, preventing color changes due to oil vomiting in building materials such as natural stone and marble.
It is resistant to wear from light pedestrian traffic in areas like terraces and balconies.
It is UV resistant, preventing cracking, yellowing, and leakage.

Application Method

The application surface should be cleaned from anti-stick materials like dust, oil, tar, pitch, paint, silicone, curing material, detergent, and mold oils.
Surfaces may need to be roughened with mechanical methods in certain areas.

NOTTEPROOF ACR TR is a ready-to-use product applied with a brush or roller.
When applying on jointed surfaces, coat the joints first using a brush.
Apply two coats of the product to all surfaces using a roller.
Allow the first layer to completely dry before applying the second layer.

The application surface should be completely dry.
In cases where the ground temperature is below +5°C and above +35°C, the material should not be applied.
Packages are designed for single use.
When it is opened, it must be consumed completely within the specified periods.
The material should be protected from rain, frost, and direct sunlight within the first 24 hours after application (+20°C).
Do not apply on damp or wet surfaces, in areas with negative water-water vapor pressure, and in areas that are in constant contact with water such as swimming pools and water tanks.

Consumption

On non-absorbent surfaces: 0.200 kg/m²
On absorbent surfaces: 0.400 kg/m²

Packaging and Storage

(0.7 kg + 0.1 kg) tins (3.5 kg + 0.5 kg) tins
In its original packaging, in dry, protected and ventilated environments at +10°C / +30°C, when stored protected from sun, rain, and frost, its shelf life is 12 months from the date of production.

Safety Precautions

During application and mixing, contact of the material with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water.
In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained.
Gloves, protective clothing/mask/goggles should be used during use.

Technical Data

Property	Value
Appearance	Transparent liquid coating
Density	1.10 ± 0.05 kg/lt
Application Temperature	+5°C to +35°C
Shore A Hardness	90 ± 5
Elongation at Break	> 300% (7 days)
Film Creation Time	60 ± 30 minutes
Curing Speed	1 mm / 24 hours
Service Temperature	-30°C / +80°C