Nottefix LUB 10

Description

NOTTEFIX LUB10 is a special mixture obtained from distilled water with a mixture of high quality mineral oil and emulsifiers. It is used to facilitate the separation of the molds from the concrete on all kinds of absorbent mold surfaces, to ensure that the molds are easily and quickly removed and cleaned, and to obtain a smooth concrete surface.

Usage Areas

It is used on all kinds of absorbent mold surfaces, especially wooden molds. When applied to plywood and wooden molds, it allows easy and fast removal of the mold and makes it easier to clean the mold.

Characteristics

It provides easy disassembly of the formwork and obtains smooth-surface concrete. It facilitates placing the concrete in the mold and removing air bubbles, and facilitates the cleaning of the mold.
It increases the efficiency and life of the mold in which it is used, significantly reducing the cost of molding and workmanship in structures.
It does not pose an adherence problem, so it eliminates the use of paint and preplaster primer on concrete surfaces.

Application Method

The molds must be clean before using the NOTTEFIX LUB10.
The application is performed homogeneously on the mold surface in a single layer with a brush, roller or spray. In order to achieve the best performance, it should be ensured that the product forms a thin film layer. Excessive oil on the surface should be removed with sponge, cloth, etc., as excessive use of oil may cause staining in the concrete. Newly applied formwork surfaces should be protected from rain before concrete pouring.

Consumption

Depending on the condition, surface, type, and separation method of the mold, 25-30 m² surface is covered with 1L.

Packaging and Storage

30 lt Plastic drum.
The shelf life is 24 months in its original, unopened packaging in a cool and dry environment.

Safety Precautions

Contact of the product with the skin and eyes should be prevented, and in case of contact, it should be washed with plenty of water. If swallowed, drink a few glasses of water immediately and seek medical advice. In case of contact with eyes, they should be washed immediately with plenty of water and medical assistance should be obtained.
Gloves and protective goggles should be used during use.